Values marked Assumption are placeholders for planning and should be replaced with measured or supplied local data when available.
Working configuration
This is the configuration currently being edited. Save it from the Configurations view or when you run a simulation.
13 locations · 1 trucks · 4 processing sites · total expected demand 64.7 lb/day
Depot
Home base for the fleet. The simulator geocodes the address, so no coordinates are set here.
Collection locations
Drop-off sites with bin capacity, starting fill, expected daily food-scrap generation and on-site service time.
Provenance:DataSuppliedAssumptionClick a badge to change how a value is sourced.
| Location | Address | Bin capacity (lb) | Initial fill (lb) | Expected demand (lb/day) | Service time (min) | |
|---|---|---|---|---|---|---|
Fleet
Model v0.1.0 uses truck weight capacity as the active routing constraint. Loading method is recorded for future model versions and does not yet constrain routing.
| Truck | Max payload (lb) | Cost per mile ($) | Cost per hour ($) | Loading method | |
|---|---|---|---|---|---|
Assumption | Assumption | Assumption |
Processing sites
Destinations for collected material. All capacities and times below are assumptions.
| Processing site | Address | Storage capacity (lb) | Throughput (lb/day) | Unload time (min) | |
|---|---|---|---|---|---|
Assumption | Assumption | Assumption | |||
Assumption | Assumption | Assumption | |||
Assumption | Assumption | Assumption | |||
Assumption | Assumption | Assumption |
A physical place may be both a collection location and a processing site.
Simulation settings
Model version is fixed at 0.1.0.
Use fixed demand values.
0.1.0 (fixed)